Questions & Answers for: psw10

...blown, located under the back pannel. Mine just did the same thing. Problem is the problem with my PSW10 goes beyond the fuse. I have contacted Polk tech support to help me trouble

Polk Audio PSW10 not working My PSW10 will not work. It has been idle for a few months and there is now no power. I have tried another outlet with no positive results. I just read this same problemin ...

best hook- up Polk psw10 sub woofer to yamaha rx-v663 receiver I have one rca subwoofer connection on amp and a left & right rca on speaker. I would assume a y connector would be the answer. I cannot ...

psw 202 even without wires attached, I instantly blow fuses. My speaker is 100 watts with very few hours used. I did not solve my problem, and i'm not interested in purchasing your plan. Thanks anyway

subwoofer was working okay and now I have a subwoofer err - no sound CHECK THE WOOFER SETTINGS FROM THE MAIN MENU. AND CHECK THE WIRE CONNECTED TO UNIT. CHANGE THE WIRE, IF STILL NO SOUND, GET IT ...

Polk Audio PSW10 electrical board smoking I have the polk audio 10" powered sub woofer and it blew the fuse, I replaced the fuse and it blew again. I plugged it in while I had it apart and the back of

I have my Polk Audio PSW10 Subwoofer hooked up to my Onkyo TX-SR608 receiver and I can not get any sound from it. Meaning I can hear the humming, but no audio at all. The reciever have an feature ...

my polk audio psw10 subwoofer has a concent sound coming out of it even if the reciever isnt on or even plugged from it the only way to stop it is to plug it from the wall The capacitors in the ...

my receiver has one pre-out will a psw10 work yes but a sub woofer out is better. You may have to crank up the sub response. If it has a level on the sub with a crossover set the cross over to around ...

Just hooked up psw10 10in to a onkyo receiver I tested it it worked but there’s no sound the standby light is red Maybe "Polk Audio PSW10 10’’ "&there’s no sound the standby light is red. Connect ...