Questions & Answers for: remove pickup roller lexmark

Question about P4350 All-In-One InkJet Printer

2 Answers

...paper pickup roller problem is as much thatyou have checked that there is no obstacle in the paper path. for the range the printer belongs to and the couple of years use check the paper pick-up ...

Ad

Question about X1270 All-In-One InkJet Printer

1 Answer

...remove these will often allow you to see (and clean) the pickup rollers. Use a cloth or hard paper towel with tight fibers and some cleaner such as '409' or 'Simple Green' to wipe the rollers. This ...

Ad

Question about X1270 All-In-One InkJet Printer

2 Answers

pickup rollers with a damp cloth, and dry the rollers with a clean part of the cloth. If it is still feeding paper in scew, then there could be something stuck inside the printer. I had about the same

Question about Optra T612n Laser Printer

1 Answer

...pickup rollers. On the shaft is a plastic moulding to which a spring is attached which keeps the paper feed rollers up when not printing. The moulding broke and the spring detached and the feed ...

Question about X215 MFP All-In-One Laser Printer

0 Answer

...are careful, you can remove the entire pickup wheel by unlatching the small fasteners and removing the whole wheel, remove the old tire, reinstall a new tire and reassemble the entire

Question about Optra T614 Laser Printer

2 Answers

...pickup rollers for $6.95 shipped. Contact us at 318-447-9040 or tech@ccl-la.com if you need a set. I hope this helps, if so please rate our solution. Buddy Corporate Computer www.ccl-la.com ...

...pickup rollers on my Lexmark C510 printer so that I can clean these parts? The paper pickup rollers are non-removable. If you really need to clean those, just try to reach as far as you can and get ...

Question about X2500 All-In-One Printer

1 Answer

...ones, remove the old rollers and turn the rubber pickup band inside out..I have heard that this worked and depending on your printer usage this could be what gets you by until the new roller

...pickup rollers are dropping down, you can see this from the back if you look at the gap between the tray and body of the printer then your problem is likely that the bevel drive gear that runs the ...

...fairy liquid on it and clean the roller. Fairy liquid is a great degreaser and will remove all the oil from the rollers surface. it will then pickup first time provided the roller has not worn

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73781 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

42220 Answers

Brad Brown

Level 3 Expert

19190 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...