Questions & Answers for: IBM replace bios Computers & Internet

...BIOS clock not updating. Replace this battery and go into the BIOS setting and configure the date/time settings, and hardware settings (if you are not sure select the factory default settings) save ...

error 0175: bad crc1 stop post task I replaced the hard drive and still get that message. I can't get to the bios. Any ideas on how to get my laptop working again? It appears that your BIOS battery is

you cannot enter and change the BIOS settings without this password. Replace the BIOS battery with a new one, then boot up and enter your BIOS password, then change the time & date, then save and exit

setting in the BIOS is incorrect and needs to be reset in the BIOS configuration. This is caused by a dead or nearly flat BIOS battery. You need to replace the BIOS battery and reset the Date and Time

...bios bottery will need to be removed for 1 min then replace. it should bring it back if not you bios chip has burnt out. i have never replaced a bios chip but you will have to find one to replace ...

thinkpad r50e, bios is not working, can it be ThinkPad R50e, BIOS is not working. Can it be replaced? yes u can replace your BIOS .

...Especially if the BIOS is not in a socket but hardwired to the mainboard and can't be easily replaced. The problem is that if the BIOS is the issue you aren't going to get past POST to read ...

BIOS gets corrupted. Replace the battery immediately, load the recommended settings in the BIOS and use the pc like that for a few days. If after that you still get the same problem then the BIOS chip

has errors This can happen if the BIOS battery is flat. Replacing the BIOS battery should fix this error. Replace the BIOS battery and then go into the BIOS configuration and set the Date and time etc

BIOS Problem Date and Time Not Update This problem can occur if the BIOS battery is flat. Replace the BIOS battery and go into the BIOS configuration to set the date & Time.