Questions & Answers for: how to replace a fret

...you play a solo you can get a muffled sound out of certain strings. This happened to me, i just replaced this unit, very cheap, and all was fixed. Hope this can work. Best ...

Fret cloth? Never heard of anything like that. The speakers will have GRILLE CLOTH covering the openings and the case has a material often refered to as "Tolex" covering it. Grille cloth is NOT easily

...fret on the 2nd string (B string),when playing with slight drive or distortion, the note does not sound clean.it sounds all muddy. its as if the frequency keeps changin minutely.notes there have a ...

...the neck all up and down the fret board. The dealer says that's not uncommon. Should I push for a replacement? Considerations: 1. Intonation problems can be due to worn strings even if the guitar

...another doesn't work then you might have a bad hammer coil on the shuttle assy and it needs to be replaced. I have in stock ...

how to replace fret wires of a guitar fret wires are something that needs to be professionally done. i suggest taking it into a shop and have them do a fret job on it.

...replace the frets when its time? It has the unique cream binding which goes over the side of the fret...... If you are not an experienced repairman and your guitar has any value, take it to a ...

I have a 2015 Gibson LPM with the zero fret nut. I have replaced the brass zero fret nut with the replacement that Gibson sent me. My problem is with the G string not intonating. Other strings r fine.

Replacing fret board on banjo A friend has a banjo without a fretboard. What I'm concerned about is how thick of a fretboard to use, and how high the frets should be. I normally make lap steels, where

fret-string-buzz-on-a-acoustic-guitar This should be possible to fix, depending on the cause, but because this is an acoustic guitar adjusting the action, frets and any major neck issues is a job that