Questions & Answers for: scanner blur

my scanner shows blurred scanned docs my scanner is perfectly working but then when i used it again all the documents i scanned (b and w or colored) gives out a blurred item driver

...whether the blurred position is at the same position or not.If it is at the same position, check scanner for its free movement, there may be an obstacle which will not allow the scanner to move ...

...on my monitor is blurred n dull n d brightness cant b adjusted! Monitor issue is not a Barcode Scanner problem. Now then...go to your control panel/hardware and sound/display. There should be ...

The scanned image is just blurred lines and dots. Scanner working normally. It's recognized in device manager.Software reinstalled. No help. Tks. search at LINK.

My computer monitor a 19inch lcd by NEC is slowly blurring on the left hand side half way vertically. It stars blurring on a smaller section and proceeds til half of it is in vertical lines. HAving a ...

blurred pictures when scanned If the blurring is slight, it could need a deep cleaning of the glass on both sides and/or mirror assembly. A tech would probably need to do this as it requires tools. If

on beginning to print, the feed roller grabs three or four sheets instead of one and they all end up going throgh the printer but the printing on the top sheet is blurred your printer required ...

blurred scans used micam scanner for 35mm slides but result was so blurred people were not able to be identified try cleaning the glass as if this has greasy smears over it then the pictures not going

...good before the paper enter in the fixing unit . That mean the problem is is the fixing unit Blur copy means u need to clean CCD & add oil to the scanner moving rod i am sure problem will be ...

...can I resolve this? If printing is OK not blurry. Only get blur on copy, try cleaning the scanner glass for both the feeder and the big glass. If that doesn't solve it. Try check your copy