Questions & Answers for: sensor 2004 dodge intrepid

2004 dodge intrepid stall on take off Iwould suspect a bad cam sensor to be the problem!

2004 dodge intrepid how many sensors does the tranmission have on it and where is sensor for the modulator located you should have a input sensor and a output sensor on the driver's side of the trans!

...sensor is located on my 2004 dodge intrepid 2.7 liter V-6 If you are looking at the motor from the front of the car it is on the right side of the plenum it has a wire hook up and it gets vacuum ...

2004 Dodge Intrepid. The codes were PO172, PO174 and PO175. The car has no MAF sensor or EGR valve, has a rough idle at startup. It also has a miss when in gear with foot on the brake. It acts like it

locate cam position sensor on 2004 dodge intrepid The camshaft position sensor is mounted to the top of the timing case cover.

any guidance in changing a crank sensor in a dodge intrepid 2004 3.5 soho disconnect wiring harness un bolt the old one install the opposite need more help e-me, Lee

...dodge intrepid won't start I turn the key My 04 dodge intrepid won't start possibly from the cold. I turn the key and it turns, the engine revs a little but won't get all the way to starting. I tried ...

2004 dodge intrepid driveing down road and it died and wont start or get fire to plugs is it a sensor More then likely yes, I would check your Crankshaft sensor, that what send the signal to the coil ...

where is the camshaft position sensor on a dodge 04 intrepid The camshaft position sensor is mounted in the front of the head on 2.7L or belt cover on the 3.5L .

2004 Dodge Intrepid 2.7 liter engine cam shaft sensor from the wireing harness. Sensor connected to wireing harness. Need to replace sensor . having trouble getting the connecter from the sensor. Most