Questions & Answers for: shift motor

Question about Aficio 1035 Copier

Aficio 1035 ps

...shift motor turned on, or the stack height sensor does not activate within the specified time after the shift tray lift motor turned on. Shift motor defective or overloaded Shift tray lift motor ...

Question about 1997 Expedition

1 Answer

How to replace transfer case shift motor

shift motor how do i replace the transfer case shift motor on my 1997 expedition? I have a 1999 f-150. It does not shift into 4WD (hi or low). I checked the fuses and they are ok. I think I may need a

Question about imageRUNNER 8500 Copier

1 Answer

Wath can i do,if the machine Canon Image Runner

...shift motor (M10) Stapler shift home position sensor (P16) Detection The stapler shift home position sensor does not go OFF when the stapler shift motor is driven for 4 sec. The stapler shift home ...

Question about imageRUNNER 8500 Copier

1 Answer

How do i replace the

...SHIFT MOTOR ELECTRICAL CONNECTOR.THEN REMOVE THE RETAINING BOLTS AND REMOVE THE ELECTRIC SHIFT MOTOR AND ENCODER ASSEMBLY.REMOVE AND REPLACE RUBBER GASKET.INSTALL NEW SHIFT MOTOR TORQUE SHIFT MOTOR ...

Question about Aficio 450 Copier

1 Answer

I am getting an area R jam followed by SC726-00

Shift/Lift Motor Error Definition [B'] 1) Tray shift does not finish within a certain time after the shift motor turned on. 2) The stack height sensor does not activate within a certain time after the

Question about 2004 Dakota

1 Answer

Where is the transfer case

shift motor located on 2004 dodge dakota The transmission control module and the transfer case control module are separate parts. The transmission control module is mounted under the hood and controls

Question about 1997 Grand Cherokee

1 Answer

My 97 Grand Cherokee is locked in four wheel

...shift motor. Disconnect the vacuum harness. Remove the housing attaching bolts. Remove the housing, motor and shift fork as a unit. Mark the shift fork for installation reference. Rotate the shift ...

Question about 1997 Grand Cherokee

1 Answer

How can I get the front axles on my 97 Jeep Grand

Question about imageRUNNER 8500 Copier

2 Answers

E000532-8001

Question about imageRUNNER 8500 Copier

1 Answer

I own a 02 foard explorer shift motor was bad i think and i removed it, i started it to relocate it, installed the new shift motor

...shift motor was bad i think and i removed it, i started it to relocate it, installed the new shift motor Checked fuse 17 and 23 and 23 was bad I changed it and its still not shifting. What do i do ...