Questions & Answers for: stuck piece paper copy machine

...should be some kind of black plastic flapping piece...the paper pushes it up as it goes through the machine. If this is stuck up, the docfeeder might think that the paper is stuck inside the

...piece of paper out. HELP make sure there is nothing stuck in paper path or the scanner lens is not dirty. take out toner/drum tray and reinsert it to make sure nothing is preventing drum from turning ...

...piece of paper stuck in my fax machine this morning (Brother IntelliFax 2820). I removed the paper and now I can't do anything (not even copy a piece of paper). The fax just beeps when I hit any ...

...stuck inside the machine and does not come out. I'm assuming either something is blocking it from coming out or an internal feed piece isn't working properly but that's just my hypothesis. Anyways, ...

stuck in the fuser, causing a jam. Certain paper types are only made to be used in specific printer types. One of the reasons for this is paper thickness. This is especially the case with bonded paper

...paper comes thru fine indicating that neither the feed or receiving area has anything stuck in it. Sounds like you may have a small obstruction in the scanner feed. This would inhibit making copies ...

...in right cover to remove. Unable to copy ther is a paper jam in the machine, open the side cover and remove the paper jam, if the paper is not visible then there is a small piece stuck

stuck paper, can' hold on, it is in the middle part of the mashine You will need to take the machine appart. There are usually access pannels for all areas that paper go through for this exact

...piece of paper that is stuck or has ripped off inside the machine, you going have to look with flashlight follow the feed rollers and you will find paper, paper clip, a staple, dirt, something ...

Help my hp LaserJet 1018 only print two copies and always complain paper jam with no paper in it There could be a piece of paper stuck in one of the sensors. Blow the machine out.....