Questions & Answers for: stuck shredder

...Shredder is stuck in reverse and when turned on goes into the reverse position and will not shred . The plastic reverse pushbutton over the soft touch keypad is broken/stuck in or down causing this ...

...shredder and it is REALLY stuck. There is paper stuck so far in that is nearly impossible to get it out. I have been doing it by hand with a pen and its taking forever. Any other ideas? It won't move ...

Paper is stuck in gears on auto Cannot reverse and... Paper is stuck in gears on auto Cannot reverse and bring back up. throw it away and never buy OfficeMax cheap shredders

...stuck on the end of my shredder. I've tried wetting it and pulling with tweasers. Its stuck like glue. If you cant get it out with your "tweezers"...then you will have to open it up to gain access to ...

shredder will not run will not run but light in shredder slot is on Sometimes paper gets stuck in the blades.Take the lid off and looks closely. Get a pen or something to dig that stuck paper out.

shredder is stuck, gears don't move Put ,just once, RX transparency and the shredder is stuck First - did you reverse it? If that didn't work, unplug the shreader , trun the cutter head over and use a

...shredder is stuck that badly, unplug it and use a phillips screwdriver to open the plastic shredder head. Once you get the plastic shroud out of the way, you'll be able to get to the shredder rollers ...

...stuck paper pieces Turn Shredder head over and repeat steps 3 and 4 Move power switch to the "Off" position Plug power cable back in Move power switch to "Rev" (reverse) position, if still stuck move ...

...shredder and see if paper sensor switch is stuck down or if it has eye sensors, try and wipe clean or blow out with compressed air. Check the attached links,instruction and guides, Good luck "I hope ...

...stuck in my shredder and now I cannot feed any paper into it. I cut the chord, so there is a little piece of the chord still stuck in the blades of the shredder. The shredder keeps going on. If we ...