Questions & Answers for: superloader Computers & Internet

ATL Superloader with LTO2 drive The Superloader will not initialize and says drive error 3D. I have been able to narrow it down to what I think is happening based on the Xtalk tool. The drive is LTO2 ...

Loading Media I am using Symantic Backup Exec 10d on my Superloader 3 LTO-3. When there is a need for the second tape and Symantic is asking to load media the auto loader does not load the second tape

Quantum Superloader remove jammed tape I get the "jammed tape" error message and don't know how to get the tape out. The loader is not under warrenty and my client does not want to spend big bucks on ...

Elem Table Bad (2B) error Quantum Superloader 3 showing elem table bad (2B) error. How do I fix it? The element error usually points to the drive, the best thing is to do is run the full diagnostics ...

Can a Quantum SuperLoader 3 have it's drive upgraded from a LTO2 to a LTO4? Yes, it can

I can't remove the left magazine from a Superloader 3. The unit has failed and I need to remove the tapes. The eject magazine does not work, it doesn't pull the drive gear back. I found this solution ...

My Ca Arcserve is showing that the quantum superload is constantly busy. I can not do anything as it also says that it is busy. I have shutdown and restarted the quantum drive a few times and all ...

superloader hardware error type d0 Update it to latest firmware 

when water level is set on superload, gets to rinse cycle and keeps filling. Will not finish cycle. don't know where the water is going when water level is set on superload, gets to rinse cycle ...

Quantum Superloader 3 - Medium Changer missing. I have recently built a Windows Server 2016. I connected Quantum Superloader 3 and installed the driver however I cannot backup as the tape library is ...