Questions & Answers for: thermal coupler problems

...Thermal Coupler. Does it have 2 wires? I am working on a "made for Montgomery Wards" wall furnace for some elderly people. Pilot light is working however the burners never kick on. Suspected the ...

...thermal coupler to warm up? after pilot lights up, don't immediately let go of button for about 15 to 20 seconds then let go and pilot should stay on. If not, you may need a new thermal coupler for ...

No heat, replaced gas igniter Does this model have a thermal coupler? that could be the problem.

Amana ARG7302WW Oven Igniter Lights, I smell gas but it never heats up to temp. Most reasons of this problem is caused by a faulty thermal coupler

...thermal coupler or transformer? how do i test. had problems in past with corrosion on thermal coupler. unit is on naturalngas i will say replace the thermocouple since the pilot don't stay on, if you ...

Montigo fireplace model M38DV-PFC Pilot light will not stay on, what is the problem? the thermal coupler is bad . that is the tube with the brass line going to the gas valve. and sets at the pilot.

thermal coupler..? You got it!! The thermal coup need replaced. If you can take it out yourself do so and take it to a pool and spa supplier in your area and let them know its for a propane heater and

...pressure when i start my compressor, it works just fine, but before even builds pressure the thermal protector trips, should i replace it? or what its the problem? I would bypass the thermal ...

...( a regulator valve that opens to allow gas through). which opens and allows gas through to the pilot light... if the pilot light is always out then it is the thermal coupler that is the

When I push the start button nothing starts. I know the problem is NOT the thermal coupler door switch