Questions & Answers for: tray lock

Trays locked All of sudden I cannot open either tray, I get the message "trays locked". I have unplugged unit but still did not work. Thanks, remove the tray out & put the grease on gears under the ...

Tray Locked". in setup access 'lock' is 'off' but does not affect this problem. Have tested tray motor and tray will close if already open at switch on. You have to press both the "on" button and the

...tray will not open and display reads LOCK. Trouble shooting instructions say to press simultaneously both the eject and stop buttons to release the lock mechanisim. LOCK is still not released after ...

...tray lock* with the unit off press and hold the stop button and the eject button. I had the same problem. I found these instructions to unlock it. It worked for me. Good Luck! Unplug the DVD player ...

...a PIU (paper input unit)...this has catches that lock in the tray. Usually, only one of the trays will not lock shut....but yours is a conicidence. Even if one tray didnt lock in, it is still the

...tray lock to the base. With exersaucer flat on the floor, twist each leg assembly (B) fully clockwise until it stops. Fully depress one of the pedestal locking tabs (C) then push on the leg assembly ...

...open. Then power the unit back on with the tray still open. The machine will automatically close the tray and search for a dvd. This will reset the tray lock and the machine will function ...

...lock it in, the pictograhm has a pad lock symbol to show locked and unlocked. if the blue tape is still in paper tray, remove it. hopefully no damage done to pick up assembly, or gears on paper ...

locked dvd tray Dvd tray was locked. T locked was indicated You need to manually pull (gently please) the dvd tray.

...Tray 2 has a lock symbol and the number one-can this be removed? Yes, it will show as locked because you have special paper settings on it. If you press the 123 user tools button and then Tray ...