Questions & Answers for: ultegra shift

...Ultegra 9 speed will no longer shift up to a larger cog. The shift lever doesnt "catch". It shifts down to the smaller cogs fine. My question is: is the unit "dead" or can it be fixed? yes it can be ...

...Ultegra shifter, it shifts fine up the cluster, but when I shift into the 3 higher gears the shifter does not seem to ratchet allowing it not to shift. I have lubed it, blown compressed air into it ...

Chain ring will not shift from high to low Check Shift Lever for cable movement(Cable may be trapped) / Check cable lock nut on back of the derailluer(this may be loose)/ Check derailluer movement ...

left bar end shifter does not hold on big chain wheel. The shifter turns down during riding. You may just have too much cable stretch. Try this out: shift to the small chain ring and release the ...

Ultegra 6703 skipping shifts: Ultegra skipping shifts: Identical problem, but affects both of my 6703 shifters, As Kris_bebbing reports, they both skip moving to smaller ring or sprocket. Intermittent

using ultegra gearshow do i use them? Do you mean -how do you shift-? start here: http://bicycleuniverse.info/eqp/gears.html

...shift better. The cassette: You can use any 10 spd cassette from Shimano or SRAM as long as the rear cog is no larger than 27. if you want to use a larger cog like a 28, then you will have to use the ...

...Ultegra RD6600 and CS5600 (12/25T) on my new Look bike. I'd like to put a CS6700 11/28T on it for better gearing for the steep climbs around here. Apparently the CS6700 11/28T required the RD6700. Do ...

...shift the chain to a larger rear gear. Rear Ultegra Derailleur Control 1 Push the outside left Shimano Ultegra lever in toward the bicycle. The front derailleur will shift the chain to larger front ...

...ultegra 10sp shifters with 105 crankset). In the beginning I worked properly. After four days the left shifter stack to the big ring and I cannot change to small. I roughly opened the shifter and I ...