Questions & Answers for: utilitech tanks

I have a Utilitech 1hp shallow well jet pump which turns off and on rapidly while using water. I have 25 psi in the air tank. I replaced the pressure switch and still have problems. I turned off pump ...

I have a utilitech convertable pump. It is used as a shallow well pump at the moment. It worked fine untill last week, the hot water tank went bad and we replaced the tank and all the above ground ...

what pressure should an inline tank 20 lb

once the water is shut off the pump keeps running the pump is controlled by the storage tanks pressure switch , if it continues to run well after the pressure tank has refilled with water , either the

what is the pressure settings for this tank 20/40

I have a 1/2 horsepower Utilitech pump hooked to a 36 gallon utilitech tank and need to know the cut in PSI I have a 1/2 horsepower water and I am hooking it up to a 36 gallon Utilitech bladder tank ...

We have a 36 gallon Utilitech water tank with a bladder. We have a great deal of air running thru our water line. We were told to get a tank without a bladder. Is this the route you would go? Tank ...

Utilitech 36-Gallon Vertical Pressure Tank precharge pressure Try 20-24 pounds of pressure as a starting point.

replaced 1/2 hp pump w/ Utilitech #0036758 pressure tank. open valve up water came out. add sprkler. short time shuts off. wtr gets smaller. pump comes bk on. sprkler goes to original hgt. repeats ...

My Utilitech 1 hp well pump turns on and off fast while usng water.There is about 28 lbs.pressure in tank. I saw same problem that someone else had but could not pull up the answer.Help & thanks. ...