Questions & Answers for: wait adding salt pool

...salt too after we had added enough, then added 25 pounds more. I was really worried of adding too much because then you have to drain it and start all over again! We waited about 6 hours after adding ...

...salt, waited about 4 hours to make sure it had dissolved (with the filter pump on that came with the pool) and it worked. We thought we had added enough to begin with too but apparently not. The key ...

...just wait and let the Intex do its Job? Yes, you can add chlorine. Liquid chlorine will raise the ph a bit. Don't know what kind of shock you are adding, but wait a day, recheck ph level, than

salt the pool has seen. If you are using 40# bags I'd add one more. At only 7,000 or so gallons you will go from low to ideal in a hurry so do not add more than about 10 - 20 pounds at a time. If this

...adding salt wo telling me and it kept saying low salt-I called intex they said to clean the cell with vinegar as instructed in book, and if that didnt help to call back for a warranty claim on the ...

...suggest you drop the level 8 to 12 inches, add fresh water and see what happens. If the salt is still too high, wait a day and remove another 8 to 12 inches. Thanks for your interest in

...been added and the filter has run for 24 hrs., how long do you need to wait to swim after you turn on the intex salt water system No more waiting, Enjoy!!!! You can swim while the unit is

...Wait 15 minutes and then turn on your intex salt water system.. 4.Set you hrs of operation on your salt water system for 10 to 11 hrs... 5.After running the system for 3 days, check your chlorine ...

... J6. On the bottom it says "service" and to the right "wait." I just started the salt system on my PDA and added pool boost for next 24hours about 2 hours ago. check sensor and ...

...wait 24 hours after adding salt to start the salt pump. Might turning it off (I already have of course) and waiting 24 before turning it back on help. You may think you have good flow, but the sensor ...