Bugaboo Bee - Answered Questions & Fixed Issues
Handle
On face book? check out Bugaboo Repair Guy
Bugaboo bee 09 rear wheels
Yes the Bee+ wheels fit you need two 4 mm alan / hex keys to take off the wheel. You could just change the bearings they use a 608zz bearing any bearing or skate board shop would sell but you may need to add a few spacing washers as the Bugaboo bearing has an extended core.
11/13/2014 12:24:21 AM •
Bugaboo Bee...
•
Answered
on Nov 13, 2014
•
519 views
First gen bugaboo bee handle locks
Hi Nadia
We cannot assist as this product is not manufactured by us. If Bugaboo can no longer provide help it is unlikely anyone else would be able to as the manufacturer they are the only company who would be able to source spare parts and carry out inspection and repair work required.
Bugaboo bee clamps
Hi,
All you need to do is to contact www.bugaboo.com and they will be able to sell the part to you directly.
Hope that helps.
2/18/2013 9:28:19 PM •
Bugaboo Bee...
•
Answered
on Feb 18, 2013
•
367 views
My bugaboo bee 2007 back wheel won't come off. It is rusted and needs replacement.
Refer to the link....http://shop.bugaboo.com/INTERSHOP/web/WFS/Bugaboo-Bugaboo_US-Site/en_US/-/USD/ViewProduct-Start?SKU=580520&CategoryDomainName=Bugaboo-Spare_parts&CategoryName=Bugaboo_bee_partsIs this the part you are working with? If so it maybe be necessary to drill out the pin, and depending on the amount of rust may be still difficult to remove. Try this... before trying to remove it again wrap the point where the wheel is attached with an old wash rag, wrap it tightly and secure with some string (wrap it as if you were wrapping an Ace bandage around your ankle) now soak it with penetrating oil, (WD-40 or other parts loosen-er) leave it over night (outside would be best, it smells a bit) Unwrap it and tap a few times to loosen; try again to remove. If that does not work it may need major surgery.
The backrest adjustment lock (white
I had the same problem. The stroller was not fully unfolded. Verify if the you have heard the clicks on both sides and the green spots on top of the handlebars are completely visible.
1/29/2012 8:52:40 PM •
Bugaboo Bee...
•
Answered
on Jan 29, 2012
•
2,275 views
Bugaboo Bee 2009 back wheel won't come off
Not sure if your problem is removing the Hex bolts or pressing the axel out. Either way what you have tried is all you can do at home. Pop down to your local engineering work shop. They can press is out in no time. Max they'll charge is half an hour around $40 they may do it for free if in a good mood.
11/6/2011 7:50:41 PM •
Bugaboo Bee...
•
Answered
on Nov 06, 2011
•
463 views
Not finding what you are looking for?
