...burner knob won't rotate. Are the other knobs working?Make and model are? And hoe old is it? I believe the switch that the knob turns is failing and will need a replacement! If you do not know to do ...
...are acceptible. do for all burners As for holding the knobs that is common with this stove, you could check to see if flame is hitting sensor the burner hole that lines up the sensor may be
...burner ignition repeatedly sparks up - though burners are turned off. remove knobs also remove the cover underneath knobs inspect for chaffing on wires usaly on the left side if no chaffing present ...
my whirlpool range ss630per-1 burners will ignite except of front right which give no ignitor sound at all, but the Rear Right works fine. any solutions? Each burner control knob has a built-in switch
I cleaned my stovetop (gas with 4 burners). Now when I turn on the knobs on the right side, the spark ignites on the left side burners. (When I turn the left side knobs, the spark also ignites on the ...
Question about MGR6772BDS Gemini Gas Kitchen Range
When I turn the surface control to lite sparks come from the other surface controls. The burner does come on but we are afraid to leave the burner because of the sparks coming from the other controls.
...burner either. Hi, when any of the knobs is turned to the light position, all burners will spark. That being said, if one or more of the knobs is not switching the spark module, the problem is the ...
Question about 36 in. CTD365N / CTD365L Gas Cooktop
How do I remove knobs for burners to clean them? Cooktop: Fisher & Paykel Model CTD-365 How do I remove knobs for burners to clean them? To remove the knobs from the cooktop you just pull them off
Question about 36 in. CTD365N / CTD365L Gas Cooktop
...Burner caps are clean and properly placed. The two front burners are very low and will not adjust with the knob. I tried the adjustment screw to no avail. what next Hi, you might need to get the 2 ...
Question about 36 in. CTD365N / CTD365L Gas Cooktop
Delayed reaction for deep fryer pilot to burner start Recently I noticed that there is always 3-4 seconds delay for the deep fryer burner to start on flame, it should be start on flame as soon as I ...
Usually answered in minutes!
1,163 Questions
465 Questions
395 Questions
390 Questions
353 Questions