Questions & Answers for: fuser assembly - Page 10

Fuser error 50.2 HP4345 Can you please tell me how to correct this Fuser error 50.2 HP4345? You will have to replace the fuser assembly (the error refer to the fuser warm up temperature)

Assembly Unplug the power cord from the wall outlet. The fuser unit and surrounding area can become extremely hot during operation. Perform the following procedure after the fuser unit has cooled down

...fuser assembly or just the lower pressure roller. I can't see any damage to the lower pressure roller or gears but the roller has a fine surface texture. Don't know if it is supposed to be perfectly ...

...fuser assembly that you can install yourself but you might need to have a pro work on it for you. check thermostat, heater,thermister. This is the problem with the fuser unit. Replace the fuser

...FUSER ASSEMBLY? hOW CAN i REMOVE PAPER JAM? WHAT IS THE FUSER ASSEMBLY? This is near the exit area right before copy exits into the tray or sorter It appiles heat and pressure to the copy as it goes ...

...It sound like you have to replace a Fuser Assembly: You can buy a replacement at : http://www.precisionroller.com/fuser-assemblies---units-for-dell-1600n/details_44486.html?src=gbps Good luck ...

...fuser assembly. The main user roller has a Teflon coating that keep the toner from sticking, when the coating wears off you start getting the ghost printing like you are having. You can get ...

...fuser assembly. Then bend back the black milar plastic cover and unplug the three connectors that go to the fuser. Carefully remove the assembly and then remove the two screws at the top of the fuser ...

...fuser assembly has failed. The fuser is the part that heats up and basically melts the toner to the page so it bonds permanently to the paper. The part number you will need to order is RM1-2763. This ...

paper get jam near fuser film i replaced the fuser film after that paper is jam near fuser film check pressure spring lubricate fuser under film ensure well assembling