...watching TV and it didn't come on. if close captioning doesn't work in your television,try to clean the circuit of your remote.Just open it,wipe with the use of cotton and alcohol.I'm sure it will ...
...caption to turn off on my Sony Bravia even when it says "off" on menu. What is the input source? Could the captions be on from a set-top box (cable/sat/dvd player)? I know with one satellite box, the ...
...Caption (Off, CC-1, CC-2, CC-Mute). If you can't access the menu directly, then the control board may be bad. Try shopjimmy.com for used parts with minimal wear (sets that were broken in shipping) or ...
...open the Closed Caption menu. 3 Press VOL + to turn closed captioning on. Misspellings and odd characters can occur in captioning. Also, there may be a captioning delay after changing channels. ...
Question about 32 in. LCD Flat-Panel HDTV
open the CLOSED CAPTION MENU f) Make sure the Closed Caption option "CC MODE" is set to "ON". This can be changed using the UP/DOWN arrow keys to highlight "CC MODE" and using the LEFT/RIGHT arrows to
...Caption Using the TV Menu Open the Menu screen, select the third icon, in the middle, this is the Setup Menu. In the Setup Menu, choose the Caption option. Caption: There are three items in it - ...
...caption setting and then press Vol + or Vol - to confirm the selection. Press Menu again to exit. This will only help if the captions are being interpreted by the TV. If there are open captions, they ...
...Caption button that doesn't work for your device, it could be a code mismatch. Check if there are other codes for your device manufacturer and try using them to get all the features of the TV ...
Question about Aquos LC-32G4U 32 in. HD-Ready LCD Television
...caption off on our Samsung Series 7000 LED TV Make sure it isn't your cable or satellite TV service making the captions, as closed captions on your TV are separate from the ones produced by your ...
Question about Aquos LC-32G4U 32 in. HD-Ready LCD Television
...TV's CC control only work for OTA and unscrambled cable channels when the incoming signal goes to the RF (coaxial) ANT/Cable input. If this is your source, press the Menu button. Use the left/right ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
