Questions & Answers for: serverraid

...my english are not so perfect, but i do my best. Im from Germany and have a IBM Server with 2x IBM Serverraid Cards Modelnumber "76H3587". Its a very big Card with 3 SCSI Channels. I search a ...

how do i get a IBM Xseries server to recognize a serverraid card i have a IBM xseries type8682 where the serverraid card does not recognize the drive array anymore.i have recieved a new card.what do i

...There are two easy ways to configure the new drive. 1 - reboot the server, wait for the ServerRAID BIOS to start, then press Ctrl + I (or whatever it says) to enter the mini configuration ...

...it cannot recognize the Internal Tape drive i install. It says Inquiry command failed Using IBM-PC ServerRaid Host adapter. Can any one help Chima Hi The error message you are receiving "Inquiry ...

plugged in an external tape drive into scsi controller while on and lost the raid configuration the two arrays show but the drives say DDD defunct This may due to HDD ID is conflict with external tape

ServerRAID-6i Logical drv =1, Others=0 Firmware7.12.13,Status OK Warning:1 Logical drive(s) Offline Warning:1 Online drive(s) defunct HI, It appears you may have a failed "physical" drive in your Raid

I have a problem with onboard ServerRAID-7K controller. Status is not responding properly - Error code is 2807 pls sugesst. I found the same problem with you and found the solution. Open your server ...

is 06p5737 a 66 mhz card or 33mhz? Hi! The interface type is PCI 64 hot-plug 66 MHZ. Regards, Bogdan

Cannot detect IBM ServerRaid 8i controller, cannot install firmware I installed a ServerRaid 8i controller card on my IBM x366 8863-PCJ server. But during start BIOS Post, it shows error 80 - unknown ...

Cannot detected controller to install firmware I installed a ServerRaid 8i controller card on my IBM x366 8863-PCJ server. But during start BIOS Post, it shows error 80 - unknown firmware error. ...