...Intrepid 2001 There should be a big nut with a red cap on the drivers side strut tower, that is the positive. For the negative you can use any metal part of the engine. Do you know where they are in ...
Intrepid? Disconnect the negative battery cable from the remote battery post located near the right strut tower. CAUTION After disconnecting the negative battery cable, wait 2 minutes for the driver-s
intrepid. Do you have to press it out or do you unbolt it from the steering hub Removal: Raise and support vehicle. Remove wheel. Remove caliper assembly. DO NOT allow caliper to hang from brake hose.
map sensor where is the map sensor located on a 2002 dodge intrepide 2.7 Driver side of intake manifold plenum, near dipstick area. under hood passanger side infender around strut pot area ...
...intrepid 2.7L Just follow the lower radiator hose out of the radiator to the thermostat housing.There will also be a heater hose on the housing.You have to remove the dipstick tube and plug the hole ...
...Intrepid. 4 are located under the hood. (in the corners of the hood compartment closest to the wind shield) 2 connect the strut to the brake assembly (just over where the lower ball joint/control arm ...
intrepid raise you vehicle on jackstands. remove front wheel and tire.remove front caliper from steering knuckle assembly, remove rotor from hub by pulling it staright off. remove speed sensor bracket
...jumper connection. Just north of that you will see a negative (-) BLACK cap which is the top of the strut mount where you connect the negative BLACK jumper cable, on the inside of fender wall is a ...
...intrepid where you hook up your lower ball joint and strut connects to the top I need to know the name of that item no body seems to know what I'm talking about and the one on my car has busted ...
Usually answered in minutes!
4,236 Questions
3,747 Questions
3,350 Questions
3,279 Questions
3,218 Questions