Questions & Answers for: Sharp vol Computers & Internet

LC-52D43U Volume Problem About two days after I bought my LC-52D43U I noticed that the volume isn't as loud as it originally was. When I max it out now, it sounds as if it were at half volume. Any ...

...MAIN MENU screen. 2)Press CH UP (8) or DOWN (9) to move the selection to ?PARENT CONTROL?. 3)Press VOL (+) or (?) to access PARENT CONTROL mode, then ?PARENT CONTROL V-CHIP BLOCK? is displayed. ...

...power light on a sharp model # LC-19SB24U tv a repairable problem? tv will not power up. push vol-, input, and power, at same time. keep push until tv start. Then you will see k123 at your ...

...Hello Here is the service mode entering process for Sharp Tv. Unplug the TV * Press and hold the {VOL -} & {CH+} buttons. * While holding the above buttons, plug in the TV. * The TV will turn

...MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the " " mark to "SET UP". 1.2 Press VOL (+) or (-) to access SET UP mode, then press CH UP (8) or DOWN (9) to move the " " mark to "CH ...

sharp code Hello To get into the service menu do the following. Unplug the TV * Press and hold the {VOL -} & {CH+} buttons. * While holding the above buttons, plug in the TV. * The TV will turn on

...and find out which porocess works with your Sharp TV. * Unplug the TV * Press and hold the {VOL -} & {CH+} buttons. * While holding the above buttons, plug in the TV. * The TV will turn

...Moreover below are the process, pls do so at your own risk. * Unplug the TV * Press and hold the {VOL -} + {CH+} buttons located on LCD TV unit (not in remote control) Note: If above didn't

...Moreover below are the process, pls do so at your own risk. * Unplug the TV * Press and hold the {VOL -} + {CH+} buttons located on LCD TV unit (not in remote control) Note: If above didn't

How do I get to ch 3 on my sharp 13f-m50? Try this: while holding vol- & input buttons on tv plug in set when "k" appears push vol- & chan- You will have to look around the menu for the reset ...